California Air Tools - The Largest Manufacture of Ultra Quiet, Oil-Free & Lightweight Air Compressors

CALAIR 80050BD

5.0 Hp 80 Gallon ASME Tank Air Compressor

Oil-Lubricated

Belt Driven Pump System

CONTINUOUS RUNNING up to 8 hours at 90 PSI

5.0 Hp Electric Motor

Belt-Driven Pump (3 Cylinder, Oil Lubricated)

80 Gallon ASME Steel Air Tank

15.0 CFM @ 90 PSI

17.5 CFM @ 40 PSI

208v-230v / 60 Hertz / Single Phase

(200 - 240 voltage range)

The CALAIR 80050BD Continuous Run 5.0 Hp Air Compressor is designed for CONTINUOUS RUNNING up to 8 hours at 90 PSI.

The CALAIR 80050BD Air Compressor has a Pump System that is designed to have a life cycle before maintenance/service of 5,000 to 10,000 hours of usage.

The large 80 gallon ASME Certified steel air tank is just the right size for a shop, warehouse or factory.

Ideal for Air Brushing, Bolting, Brad Nailing, Cutting, Drilling, Grinding, Finish Nailing, Framing Nailing, HVLP Painting, Hobby Nailing, Hobby Painting, Inflation, Roof Nailing, Spraying, Stapling, Trim & Impacting/Wrenching.

Designed for people looking for reliable air flow in commercial and industrial environments.

Features:

* 5.0 Hp Motor w/Reset Switch (1072 RPM)

* Belt-Driven Pump (Oil Type ISO 68 / LDAB68). 5000 to 10000 hour life.

Single Stage Pump (3 cylinders)

* Pressure Gauge

* 1/2" NPT Output Air Port

NOTE: 1/2" Output Ball Valve & Pressure Regulator NOT included**

* Power On/Pressure Switch

* Motor Thermal Overload Protector (Trips @135C)

* Working Pressure - 135 - 165 PSI

* 208 Volt (200v-216v) to 230 Volt (220v-240v) / 60 Hertz / Single Phase

* 15.0 CFM @90 PSI, 17.5 CFM @40 PSI

* Continuous Run up to 8 hours maximum

* 24 Amp Draw

* Power Requirements: Dedicated 30 amp outlet

* Plug Type: NEMA L6-30P Receptacle: NEMA L6-30R

* Maximum Operating (ambient) Temperatures: 36 to 108°F

* Time to fill tank from empty to full (155 PSI) - 7 min 50 seconds

* Recovery time from 135 PSI to 165 PSI - 1 min 19 seconds

* 80 Gallon ASME Certified Steel Air Tank

* Maximum Tank Pressure 165 PSI

* Manual Ball Drain Valve

* 200 PSI Safety Relief Valve

* L (35") x W/D (28") x H (68")

* 328 lbs (416 lbs on shipping pallet)

* 90 Decibel Noise Level

* Commercial Use: Refer to State & City Codes

* 2 Year Limited Warranty on Pump; 1 Year Limited Warranty on all other components

* Assembled in Mexico with global components

**NOTE: Pressure Regulator NOT included - two available options:

OPTION 1:

Complete 120 PSI Pressure Regulator Assembly w/Gauge (1/4" NPT Quick- Connect Output) available separately for purchase: (click here)

OPTION 2:

1/2" NPT BALL VALVE (AIR OUTPUT) available separately for purchase: (click here)

125 PSI Pressure Regulator (1/2" NPT Output) with Micro Mist separator available separately for purchase: (click here)

- Additional adapters may be required depending on setup/configuration.

CALAIR 80050BD Owners Manual
California Air Tools CAIR-80050BD Owners[...]
Adobe Acrobat document [2.9 MB]

CALAIR 80050BD Product Data Sheet
CALIFORNIA AIR TOOLS CALAIR 80050BD Prod[...]
Adobe Acrobat document [555.2 KB]

80050BD is available from:

CALIFORNIA AIR TOOLS DIRECT

Optional BALL VALVE, 1/2" NPT (AIR OUTPUT) available separately

(click here to purchase)

Optional AIR PRESSURE FILTER REGULATOR WITH MICRO MIST SEPARATOR available separately

1/2 NPT, 0.05 to 0.85 MPa

(click here to purchase)

NOTE: If you currently own the 80050BD model and would like to install an Automatic Drain, it is suggested to purchase the EZ2321ADL Automatic Drain Valve Long Extension Kit. Designed to eliminate manually draining water and condensate from air compressor air tanks. Easily Installable. All adapters and connectors are included in kit. Click Here for details.