The firmware of your Smart Controller can be updated, improving important aspects to make the device and its control more efficient.

Applies to the following California Air Tools compressor models: 

• CAT-10020SMHAD
• CAT-10020DSMAD
• CAT-10020SMSPC
• CAT-10020HDSMADC
• CAT-20040SM
• CAT-20040SMAD
• CAT-20040DSMADC
• CAT-60040SMAD
• CAT-60040DSMADC 

A. Check your firmware version:

1. Use your device and enter the Smart Controller's control interface
2. Go to the "Condition Monitoring" tab.
3. Note in the "Device Info" box the date and time shown in the "Build Time" section.

B. If your firmware is outdated, continue:

1. Download the firmware file to your computer or mobile device - refer to .bin file below. 

2. Go to the control interface and go to the "OTA Update" tab

3. Select "Browse..."  to browse to the .bin firmware file

4. Select the file and press "Update Firmware"

The Smart Controller will start uploading the file and when it finishes it will restart the computer. Wait 15 seconds before operating the air compressor.

California Air Tools Smart (Remote Control) Air Compressors - Getting Started