• Programmable ON/OFF Times
• Pressure ON Level (i.e. re-start pressure)
• Pressure OFF Level (i.e. shutdown pressure)
• Unloader Relay Delay: Delay time for activation of the unloader valves during compressor start-up (load reduction).
• AutoDrain Time: Select the time between each drain activation.
• Drain Valve Time:  AutoDrain valve opening duration.
• Overcurrent Limit: (i.e. functions as an electrical trip/breaker).
• Pressure Units: Select [bar] or [PSI]
• Total Active (Motor-Pump) Running Hours

2.0  HP (Rated/Running)

10 Gallon Steel Tank

6.40 CFM @ 40 PSI   



5.30 CFM @ 90 PSI

80% Air Drying System

70 Decibel Noise Level

The CALIFORNIA AIR TOOLS 10020DSMAD Ultra Quiet & Oil-Free Air Compressor, with Automatic Drain Valve, is designed to be one of the quietest 2.0 horse power air compressors in the industry having only 70 decibels of sound. 

The MDR2i OLED Smart Switch may be connected to mobile phones, tablets, notebooks, or computers. The switch can be used as an access point or can be connected to a Wi-Fi network. Compressor features and parameters may be entered and controlled comfortably along with remote monitoring.

The powerful 2.0 HP motor operates at only 1680 RPM creating less noise, vibration and creating less wear. The Oil-Free Dual Piston Pump System is  engineered for longevity, high performance and durability.

The SP-9421 Motor/Pump is tested for a minimum pump life of 3000 hours before service. 30% more life before repair. The SP Series of Ultra Quiet Air Compressor Motors have been designed to increase duty cycle and allow for longer continuous run times.*

The large 10.0  gallon steel air tank is only 91 lbs.



The 80% Air Dryer is specially designed to remove the water vapor from the air to protect sensitive tools and machinery. 

To dry the air from the air compressor an Aftercooler and 80% Air Dryer are utilized. The aftercooler is a heat exchanger for cooling the discharge air from the air compressor. The water vapor from the compressed air is condensed into liquid form and pushed into the Air Dryer.

The California Air Tools EZ-1 Automatic Drain Valve has been designed to eliminate manually draining your air compressor air tank.

The manually set timer allows you to set the time for both the frequency and duration of the draining process.

Designed for the person looking for Power, 80% Dry Airand Less Service with at Least 30% Less Noise! Ideal for Dental, Milling, Bio-Tech, Manufacturing, Packaging, Restaurant and General Engineering Applications.



Features:

* Ultra Quiet  -  Only 70  decibels

* Oil-Free Pump – Cleaner air for better tool operation.

                            Less maintenance and Costs.

* Regulated output pressure gauge

* Pressure Regulator (0-120 PSI)

* One - Female Industrial "Push to Connect" quick connector (1/4" NPT)

* Easy Start Valve - For Less Starting Amperage

* MDR2i OLED Smart pressure switch for remote monitoring and control

* Thermal Overload Protector

* Working Pressure 90-120 PSI (+/-5 PSI). Adjustable up to 105 PSI Kick-On; 130 PSI Kick-Off maximum.

* 110v / 60 Hz

* Low Amp Draw - Only 14.0  Amps

* Tank fill rate from empty to full - 130 Seconds

* Recovery time from 95 PSI to 125 PSI - 40 Seconds

* Duty Cycle - 70/30*

* L (16") x W (23") x H (35")

* 91 pounds

* Non-ASME Air Tank

* Air Dryer - Includes Activated Alumina desiccant with a 4000 hour life.

   Activated Alumina is used in air prepurification (due to it's high water

   and carbon dioxide adsorption capacity) and adsorption of sulphur

   compounds.

* Aftercooler (condenser)

* EZ-1-2321 Auto Drain Valve Factory Installed

* 1 Year Limited Warranty

* Manufactured in Mexico-USA. Assembled in USA using global components.

* Commercial Use: Refer to State & City Codes 

CAT-10020DCAD Base-model Product Overview (without Smart Switch) 

PRESS & HOLD the SMART Controller OK button for 4 seconds to turn ON / OFF air compressor

Automatic Drain Valve (with manual drain valve):

Optional PTFE Black Hose Tubing, 8 mm (10 feet) to connect to Automatic Drain Valve, Air Dryer Valve or Condensate port - Order Here.

NOTE: May not be suitable for applications requiring extremely low pressure dew points (PDP) below 2C or 36F. If ISO compliance is required (i. e. ISO 8573 2.3.1 with PDP performance of -29F to -50F) then a desiccant-based air dryer system will be required. California Air Tools offers 6 Ultra-Dry air compressor models which achieve a PDP average of -40F (-40℃) and outputs 98% ultra dry/clean air with 0.01 um particulate filtering -- CLICK HERE

*70/30 Duty Cycle Rating - Learn More  (i.e. may run continuously at 2.1 cfm @90 PSI for up to 4 hours, or intermittently at 5.3 cfm @90 PSI during standard work day. Do not allow motor to run continuously for more than 60 minutes.)