• Programmable ON/OFF Times
• Pressure ON Level (i.e. re-start pressure)
• Pressure OFF Level (i.e. shutdown pressure)
• Unloader Relay Delay: Delay time for activation of the unloader valves during compressor start-up (load reduction).
• AutoDrain Time: Select the time between each drain activation.
• Drain Valve Time:  AutoDrain valve opening duration.
• Overcurrent Limit: (i.e. functions as an electrical trip/breaker).
• Pressure Units: Select [bar] or [PSI]
• Total Active (Motor-Pump) Running Hours

2.0  HP (Rated/Running)

10 Gallon Steel Horizontal Air Tank

6.40 CFM @ 40 PSI      

5.30 CFM @ 90 PSI 

The CALIFORNIA AIR TOOLS 10020SMHAD SMART Ultra Quiet & Oil-Free 10 Gallon Air Compressor is designed to be one of the quietest  2.0 Hp air compressors in the industry having only 70 decibels of sound.  

The Powerful 2.0 HP motor operates at only 1680 RPM creating less noise and less wear.

The SP Series of Ultra Quiet Air Compressor Motors have been designed to increase duty cycle and allow for longer continuous run times.*

The Oil-Free Dual Piston Pump System is engineered for high performance and durability.

The CAT-10020SMHAD SMART Air Compressor has a Oil-Free Dual Piston pump designed to have a life cycle before wear of 3000 Plus hours. 

The Oil-Free pump allows for use in a variety of temperatures  (cold starts) and uneven terrains (no oil in the pump).

The Easy Start Valve feature allows for a easier start up using less starting amps. The Easy Start Valve releases a small amount of air from the pump at start up to produce a no-load condition allowing the motor to spin freely. This no-load start up requires less amps for a easier  start up in cold temperatures.

The large low profile 10 Gallon Steel Horizontal Air Tank makes storing under a bench, desk or shelf very easy.

The factory installed California Air Tools EZ-1 Automatic Drain Valve has been designed to eliminate manually draining your air compressor air tank. The manually set timer allows you to set the time for both the frequency and duration of the draining process.

The 10020SMHAD model is ideal for placement on or under a shelf; the automatic drain valve supports required maintenance by removing water from the air tank on a regular basis.

The 10020SMHAD is designed for the person looking for Power, Air Flow, Less Service and Maintenance with at Least 30% Less Noise!

Features: 

* Ultra Quiet  -  Only 70  decibels

* Oil-Free Pump – Cleaner air for better tool operation.

  Less maintenance and Costs.

* Regulated output pressure gauge

* Pressure Regulator (0-120 PSI)

* One - Female Industrial "Push to Connect" quick connector (1/4" NPT)

* Easy Start Valve - For Less Starting Amperage

* MDR2i OLED Smart pressure switch for remote monitoring and control

* Thermal Overload Protector

* Working Pressure 90-120 PSI (+/-5 PSI). Adjustable up to 105 PSI Kick-On; 130 PSI Kick-Off maximum.

* 110v / 60 hz

* Low Amp Draw - 14 Amps 

* Dedicated 15 amp outlet -14 gauge 25ft cord - Min. 5500 Watt Generator

* Time to fill tank from empty to full - 120 Seconds 

* Recovery time from 95 PSI to 125 PSI - 25 Seconds

* Duty Cycle - 70/30* 

* Less heat which dissipates more efficiently

* 10 Gallon Steel (Low Profile) Horizontal Air Tank

* EZ-1-2301 Automatic Drain Valve (with manual drain valve)

  The California Air Tools EZ-1 Automatic Drain Valve has been designed to

   eliminate manually draining your air compressor air tank.

* L (19") x W/D (15") x H (26.5")

* 75 lbs

* Non-ASME Air Tank

* 1 Year Limited Warranty

* Comes complete Two Air Filters

* Manufactured in Mexico-USA. Assembled in USA using global components. 

* Commercial Use: Refer to State & City Codes

CAT-10020CHAD Base-model Product Overview (without Smart Switch)

PRESS & HOLD the SMART Controller OK button for 4 seconds to turn ON / OFF air compressor

Automatic Drain Valve (with manual drain valve):

Optional PTFE Black Hose Tubing, 8 mm (10 feet) to connect to Automatic Drain Valve, Air Dryer Valve or Condensate port - Order Here.

*70/30 Duty Cycle Rating - Learn More  (i.e. may run continuously at 2.1 cfm @90 PSI for up to 4 hours, or intermittently at 5.3 cfm @90 PSI during standard work day. Do not allow motor to run continuously for more than 60 minutes.)