CALIFORNIA AIR TOOLS 10020SMSPC 2.0 Hp SMART Ultra Quiet & Oil-Free 10 Gallon Air Compressor in Sound Proof Cabinet

 

110v  60hz

 

58 Decibel Noise Level

 

Includes MDR2i OLED Smart Controller for remote monitoring and control

  • Programmable ON/OFF Times
  • Pressure ON Level (i.e. re-start pressure)
  • Pressure OFF Level (i.e. shutdown pressure)
  • Unloader Relay Delay: Delay time for activation of the unloader valves during compressor start-up (load reduction).
  • AutoDrain Time: Select the time between each drain activation.
  • Drain Valve Time:  AutoDrain valve opening duration.
  • Overcurrent Limit: (i.e. functions as an electrical trip/breaker).
  • Pressure Units: Select [bar] or [PSI]
  • Total Active (Motor-Pump) Running Hours

2.0  HP (Rated/Running) 

10 Gallon Steel Tank

 

Sound Proof Cabinet

58 Decibel Noise Level

 

SMART Controller

 

6.4 CFM @ 40 PSI      

5.30 CFM @ 90 PSI

110 Volts / 60 Hertz

 

 

The CALIFORNIA AIR TOOLS 10020SMSPC SMART Ultra Quiet & Oil-Free 10 Gallon Air Compressor, in Sound Proof Cabinet, is designed to be one of the quietest  2.0 Hp air compressors in the industry having only 58 decibels of sound.   

 

The MDR2i OLED Smart Controller may be connected to mobile phones, tablets, notebooks, or computers. The controller can be used as an access point or can be connected to a Wi-Fi network. Compressor features and parameters may be entered and controlled comfortably along with remote monitoring. 

 

The Powerful 2.0 HP (SP-9421) motor operates at only 1680 RPM creating less noise and less wear.

 

The SP Series of Ultra Quiet Air Compressor Motors have been designed to increase duty cycle and allow for longer continuous run times.*

 

The Oil-Free Dual Piston Pump System is engineered for high performance and durability.

 

The CAT-10020SMSPC SMART Air Compressor has a Oil-Free Dual Piston pump designed to have a life cycle before wear of 3000 Plus hours.

 

The Oil-Free pump allows for use in a variety of temperatures  (cold starts) and uneven terrains (no oil in the pump).

 

The Easy Start Valve feature allows for a easier start up using less starting amps. The Easy Start Valve releases a small amount of air from the pump at start up to produce a no-load condition allowing the motor to spin freely. This no-load start up requires less amps for a easier  start up in cold temperatures.

 

The large 10  Gallon Steel air tank and Soundproof Cabinet is 190 lbs. 

 

The sound proof cabinet has two latching doors that allows for easy access to the air compressor and components.  

The two cabinet exhaust fans are used to remove air from the cabinet to reduce heat and provide a cooler working condition for the air compressor.

 

The 4 caster wheels makes moving the air compressor from location to location very easy.

 

Designed for the person looking for Power, Air Flow, Less Service and Maintenance with at Least 30% Less Noise!

 

 

Features: 

 

* Ultra Quiet  -  Only 58  decibels

* Oil-Free Pump – Cleaner air for better tool operation.

  Less maintenance and Costs.

* Tank Pressure gauge

* Regulated Output Air Pressure gauge

* Pressure Regulator Control Knob (0-120 PSI)

* One - Female Industrial "Push to Connect" air port quick connector (1/4" NPT)

* Easy Start Valve - For Less Starting Amperage

* MDR2i OLED Smart pressure controller for remote monitoring and control

* Working Pressure 90-120 PSI (+/-5 PSI). Adjustable up to 105 PSI Kick-On; 130 PSI Kick-Off maximum.

* Thermal Overload Protector

* 110 Volt / 60 Hertz 

* Low Amp Draw - 14 Amps 

* Dedicated 15 amp outlet -14 gauge 25ft cord - Min. 5500 Watt Generator

* Time to fill tank from empty to full - 120 Seconds 

* Recovery time from 95 PSI to 125 PSI - 25 Seconds

* Duty Cycle - 70/30* 

* Less heat which dissipates more efficiently  

* 10 Gal. Steel Air Tank With Sound Proof Cabinet and Swivel Caster wheels

* L (21") x W (26") x H (32)

* 129 lbs

* 1 Year Limited Warranty

* Comes complete (2) Air Filters

* Commercial Use: Refer to State & City Codes

* Non-ASME Air Tank

* Manufactured in Mexico-USA. Assembled in USA using global components. 

10020SPC Base-model Product Overview (without Smart Controller)

PRESS & HOLD the SMART Controller OK button for 4 seconds to turn ON / OFF air compressor (manual control option)

Easy Start Valve Feature

 

The Easy Start Valve feature allows for a easier start up using less starting amps. The Easy Start Valve releases a small amount of air from the pump at start up to produce a no-load condition allowing the motor to spin freely. This no-load start up requires less amps for a easier start up in cold temperatures.

10020SMSPC Owners Manual
California Air Tools 10020SMSPC Owners M[...]
Adobe Acrobat document [2.6 MB]
Smart Controller MDR2i Owners Manual
Smart Controller MDR2i Owners Manual_022[...]
Adobe Acrobat document [1.1 MB]
10020SMSPC Product Data Sheet
CALIFORNIA AIR TOOLS 10020SMSPC Product [...]
Adobe Acrobat document [650.1 KB]

*70/30 Duty Cycle Rating - Learn More  (i.e. may run continuously at 2.1 cfm @90 PSI for up to 4 hours, or intermittently at 5.3 cfm @90 PSI during standard work day. Do not allow motor to run continuously for more than 60 minutes.)

 

To update SMART Compressor Firmware refer to instructions HERE. 

California Air Tools Store - Brand New & Blemished Items
SMART Air Compressors
1.5G 1Hp Home Compressor
4.7 Gal 1Hp DIY Compressor
80 Gal 5.0 Hp 15 CFM
Ideal Job-Site Air Compressor
80 Gal 6.0 Hp 20 CFM
60 Gal 3.7 Hp 11.5 CFM
17-20 cfm 280V 3-Phase
Complete Out-of-Box Solution
CAT-10TL Tankless 1 Hp
ISO 8573 2.3.1 - 98% Dry Air
8 Gal Aluminum, 1 Hp, 3 CFM, Long-Life Motor, 60 dB
Print | Sitemap
© california air tools inc

This website was created using IONOS MyWebsite.