CALIFORNIA AIR TOOLS 10020HDCADC

 

Powerful 2.0 Hp Ultra Quiet, Ultra Dry & Oil-Free Air Compressor with 98% Air Drying System and Automatic Drain Valve

 

ISO 8573 - Class 3-2-1 Compliant

 

70 dB Noise Level

 

2.0  HP (Rated/Running)

 

10 Gallon Steel Horizontal Air Tank

 

Air Dryer Cartridge System - Up to 98% Dry Air

 

6.40 CFM @ 40 PSI      

5.30 CFM @ 90 PSI

 

110 Volts / 60 Hertz / Single Phase 

 

The CALIFORNIA AIR TOOLS 10020HDCADC Ultra Quiet, Ultra Dry Oil-Free Air Compressor with Air Drying System is designed to be one of the quietest  2.0 Hp air compressors in the industry having only 70 decibels of sound.   

    

The Powerful 2.0 HP motor operates at only 1680 RPM creating less noise and less wear.

 

The SP Series of Ultra Quiet Air Compressor Motors have been designed to increase duty cycle and allow for longer continuous run times.*

 

The Oil-Free Dual Piston Pump System is engineered for high performance and durability.

 

The CAT-10020HDCADC Air Compressor has a Oil-Free Dual Piston pump designed to have a life cycle before wear of 3000 Plus hours. 

 

The Oil-Free pump allows for use in a variety of temperatures  (cold starts) and eliminates oil from being in the air.

 

The large 10 Gallon Horizontal Steel Air Tank is just the right size to fit under a bench, desk or cabinet.

 

The Air Dryer is specially designed to remove up to 98% of the water vapor from the air to protect sensitive tools and machinery. 

 

PDP performance range (-20' F. to -51' F.)

Air Quality: ISO 8573 - Class 2.3.1

 

To dry the air from the air compressor an Aftercooler and 98% Air Dryer are utilized.

 

The aftercooler is a heat exchanger for cooling the discharge air from the air compressor. The water vapor from the compressed air is condensed into liquid form and pushed into the Air Dryer.

 

The easy to replace "Spin-On" Air Dryer Cartridge has a regenerating High-Temperature Molecular Sieve Desiccant to dry the air.

 

This cartridge dryer has a life of 2-years before replacement.

 

The California Air Tools EZ-1 Automatic Drain Valve has been designed to eliminate manually draining your air compressor air tank.

The manually set timer allows you to set the time for both the frequency and duration of the draining process.

 

Designed for the person looking for Power, 98% Dry Air with Low Dew Point Air Flow and Less Service with at Least 30% Less Noise! Ideal for Dental, Milling, Surgical, Manufacturing Clean Rooms, Restaurant and General Engineering Applications.

 

Features: 

* Ultra Quiet  -  Only 70 decibels

* Oil-Free Pump (Class 1) – Cleaner air for better tool operation.

  Less maintenance and Costs.

* Two pressure control gauges 

* One - Female industrial "Push to Connect" quick connector

* 0.01 Micron Prefilter

* 5.0 Micron (Class 2)  Air Filter & Regulator

* Condor Pressure Switch

* Thermal Overload Protector

* 125 PSI  Maximum Pressure 

* 110 Volts / 60 Hertz / Single Phase

* Low Amp Draw - 14 Amps 

* Time to fill tank from empty to full - 120 Seconds

* Recovery time from 95 PSI to 125 PSI - 25 Seconds

* Duty Cycle - 70/30* 

* Less heat which dissipates more efficiently

* 10 Gallon Steel Air Tank for Commercial use.

* L (20") x W/D (28") x H (26")

* 100 lbs

* Air Dryer Cartridge uses a High-Temperature Molecular Sieve Desiccant

  Easy to remove (spin off) and replace every 2 years

* Aftercooler (condenser)

* PDP performance range (-20' F. to -51' F.)

* Air Quality: ISO 8573 - Class 2.3.1

* EZ-1-2321 Auto Drain Valve Factory Installed

* 1 Year Limited Warranty

* Comes complete (2) Air Filters

* Commercial Use: Refer to State & City Codes

* Non-ASME Air Tank

* Assembled in USA with global components

 

Automatic Drain Valve Feature:

Optional PTFE Black Hose Tubing, 8 mm (10 feet) to connect to Automatic Drain Valve, Air Dryer Valve or Condensate port - Order Here.

Easy Start Valve Feature:

The Easy Start Valve feature allows for a easier start up using less starting amps. The Easy Start Valve releases a small amount of air from the pump at start up to produce a no-load condition  allowing the motor to spin freely. This no-load start up requires less amps for a easier start up in cold temperatures.

Quick Start Guide
Quick Start Guide - Generic.pdf
Adobe Acrobat document [338.2 KB]
California Air Tools 10020HDCADC Owner's Manual
California Air Tools 10020HDCADC Owner'[...]
Adobe Acrobat document [2.5 MB]
EZ-1 Automatic Drain Valve Owner's Manua[...]
Adobe Acrobat document [2.0 MB]
California Air Tools Ultra Dry Service K[...]
Adobe Acrobat document [562.1 KB]
Air Quality classes defined in ISO 8573.[...]
Adobe Acrobat document [86.6 KB]

*70/30 Duty Cycle Rating - Learn More  (i.e. may run continuously at 2.1 cfm @90 PSI for up to 4 hours, or intermittently at 5.3 cfm @90 PSI during standard work day. Do not allow motor to run continuously for more than 60 minutes.)

California Air Tools Store - Brand New & Blemished Items
Links to Authorized Resellers
17-20 cfm 280V 3-Phase
Complete Out-of-Box Solution
CAT-10TL Tankless 1 Hp
12 CFM 98% Dry Air, 20 Gal, 6 Hp, ISO 8573 compliant
CAT-33000 Spray Gun, 1.3 mm nozzle, 600 cc Fluid Cup
4.7 Gal, 1 Hp Compressor & LVLP Spray Painting Bundle
Ultra Quiet, Oil-Free, 8 Gal Aluminum, 1 Hp, 3 CFM, Long-Life Motor
6.0 Hp, 20 Gal Ultra Quiet Oil-Free, 15 CFM Compressor
SPRAYIT PRO 21 Electric Professional Airless Paint Sprayer w/Accessories
Print | Sitemap
© california air tools inc

This website was created using IONOS MyWebsite.