Select Compressor By Application

Select the application below to help you choose the right air compressor for your tooling or job type. NOTE: All air tools/systems typically have a minimum air volume requirement and are expressed in cfm (cubic feet per minute) or liters per minute (lp/m).     

>> CLICK HERE to learn more <<  

Model Nomenclature Definitions:

  • A = Aluminum Tank
  • AC = Aluminum Tank
  • S = Steel Tank
  • SP = Steel Tank + Front Panel
  • SQ = Steel Tank, Consumer Grade
  • AD = Includes Automatic Drain Valve
  • CAD = Condor Switch + Automatic Drain Valve
  • HP = High Pressure
  • DC = 80% Dryer
  • LFC = Steel Tank + Long Life Motor (i.e. 4000+ motor running hours)
  • ALFC = Aluminum Tank + Long Life Motor (i.e. 4000+ motor running hours)
  • LFDC = 80% Dryer & Long Life Motor (i.e. 4000+ motor running hours)
  • DCAD = 80% Dryer & Automatic Drain Valve
  • DCADC = 98% Air Dryer & Automatic Drain Valve
  • HDCADC = Horizontal Tank, 98% Air Dryer & Automatic Drain Valve
  • SPC = Standard Air Compressor in Sound Proof Cabinet
  • DSPC = 80% Dry Air Compressor in Sound Proof Cabinet
  • DSPCAD = 80% Dry Air Compressor in Sound Proof Cabinet & Automatic Drain Valve
  • DSPCADC = 98% Dry Air Compressor in Sound Proof Cabinet & Automatic Drain Valve
  • CR = Continuous Run Air Compressor (100% Duty Cycle)
  • C = Condor Switch

Homeowner / General Use:

Inflating Bike or Car Tires – Get the 1P1060SP or 8010

           > 1P1060S Specifications 

           > 1P1060SP Specifications

           > 4710SQ Specifications

           8010 Specifications

Remodeling w/Brad Nailer - Get 2010A, 2010SP or 4610S

           2010A Specifications (Aluminum)

           > 2010SP Specifications (with Pre-Set PSI levels)

           > 4610S Specifications

RV/Offroad 12 Volt Battery Unit - Get 12V1P10S

           12V1P10S Specifications

General Construction – Get 4610S, 4610AC or 4620AC

           > 4610S Specifications

           > 4610AC Specifications (Aluminum) 

           > 4620AC Specifications (Aluminum)

           > 4620AC-22060 Specifications (Aluminum, 220 Volts Only)

General Home Use (to 2.2 CFM) – Get 8010 or 8010A

           8010 Specifications

           > 8010A Specifications (Aluminum)

Truck/Tractor Tires & Blowing Stuff Off – Get 1620S, 10020C or 15020C

           > 1620S Specifications 

           10020C Specifications

           > 10020AC Specifications (Aluminum)      

           > 15020C Specifications

Performance Bike Tires (up to 175 PSI) – Get the 20015HP

           > 20015HP Specifications    

           > 20015HPAD - Automatic Drain Demo

Clearing Residential Sprinkler Lines – Get 10020C or 20020

           10020C Specifications          

           > 20020 Specifications      

General Medium Use (to 5.3 CFM) – Get 20020 or 20020AD

           20020 Specifications       

           > 20020AD - Automatic Drain Demo

Sound Proof Cabinets – Get 8010SPC, 10020SPC or 20040SPC

           > 8010SPC Specifications (up to 3 CFM)

           > 10020SPC Specifications (up to 5.3 CFM)          

           > 20040SPCAD Specifications (up to 10.6 CFM)    

 

Painting:

Air Brushing – Get 1P1060S or 1P1060SP

          > 1P1060S Specifications

          > 1P1060SP Specifications

Specialty Projects – Get 2010A, 2010SP, 4610AC or 4710SQ

          2010A Specifications (Aluminum)

          > 2010SP Specifications

          > 4610AC Specifications (Aluminum)

          > 4710SQ Specifications

LVLP Light Painting & Touch Up - Get 1P1060S or 1P1060SP

          > 1P1060S Specifications

          > 1P1060SP Specifications

LVLP Stain/Lacquer Painting - Use 1 Hp (8010, 8010A) 

          8010 Specifications

          > 8010A Specifications (Aluminum)

          > 8010AD Specifications (with Auto Drain)

LVLP Latex Painting - Use 2 Hp (10020C, 15020C, 20020)

          > 10020C Specifications

          > 10020CAD Specifications (with Auto Drain)

          > 10020AC Specifications (Aluminum)     

          > 15020C Specifications

          20020 Specifications

LVLP Liquid Masking - Get the 10020C

          > 10020C Specifications 

Residential Painting (LVLP) – Get the SP-33000 LVLP Gun

          > SP-33000 Specifications

Pressure Pots for Spray Painting - Get the 365 or 366

          > 365 Specifications

          > 366 Specifications

Automotive Painting (80% Dry Air) – Get the 10020DC, 20040DCAD or 20040DSPCAD

          > 10020DC Specifications (up to 5.3 CFM)

          > 10020DCAD Specifications (up to 5.3 CFM, with Auto Drain)

          > 20040DCAD Specifications (up to 10.6 CFM)

          > 20040DSPCAD Specifications (up to 10.6 CFM, Sound Proof Cabinet)

Automotive/Specialty Painting (98% Dry Air) – Get the 10020HDCADC, 20040DCAD or 60040DCADC

          > 10020HDCADC Specifications (up to 5.3 CFM, 110 Volts)

          > 10020HDCADC-22060 Specifications (to 5.3 CFM, 220 Volts only)

          > 20040DCADC Specifications (up to 10.6 CFM)     

          > 20040DSPCADC Specifications (up to 10.6 CFM, 98% Dry Air in Sound Proof Cabinet)

          > 60040DCADC Specifications (up to 10.6 CFM, 98% Dry Air)

Vehicle Panels – Get 15020C or 20040CAD

          > 15020C Specifications

          20040C / 20040CAD Specifications

Car & Truck Bodyshop (HVLP) – Get the 20060CAD

          > 20060CAD Specifications (up to 14.6 CFM)      

LVLP Professional – Get the SP-33500K Gun Kit

         > SP-33000 Specifications

         > SP-33500 Specifications

         > SP-33500K Specifications

 

Contractor / Construction:

Brad Nailing – Get the 1P1060S, 2010A or 4610AC

          > 1P1060S Specifications

          > 1P1060SP Specifications

          > 2010A Specifications (Aluminum)

          > 2010SP Specifications (Pre-Set PSI Levels)

          > 4610AC Specifications (Aluminum)

Interior Remodeling (to 2.2 CFM) - Get the 8010, 8010A

          8010 Specifications

          > 8010A Specifications (Aluminum)

          > 8010AD Specifications (with Auto Drain)

Framing/Roofing/Flooring (to 5.3 CFM) – Get the 4620AC, 10020C or 10020AC

          > 4620AC Specifications (Aluminum)  

          10020C Specifications

          > 10020AC Specifications (Aluminum)   

General Construction – Get the 4610AC or 4620AC

          > 4610AC Specifications (Aluminum)       

          > 4620AC Specifications (Aluminum)  

Stapling/Nailing (up to 4” Nails) – Get the 4620AC or 10020C

          > 4620AC Specifications (Aluminum)  

          10020C Specifications

Pipe & Systems Flushing – Get the 10020C or 10020AC

          10020C Specifications

          > 10020AC Specifications (Aluminum)  

 

AutoBody Shop / Restoration:

General Tire Inflation – Get the 10020C or 10020AC

           10020C Specifications

           > 10020AC Specifications (Aluminum)  

           > 10020CHAD Specifications

           > 10020CHAD-22060 Specifications (220 volts only)

Dent Removal – Get 15020C or 20040CAD

           > 15020C Specifications

           > 20040CAD Specifications

Blowing Stuff Off – Get 10020C, 15020C or 20020

           > 10020C Specifications

           > 10020CAD Specifications (with Auto Drain)

           > 10020AC Specifications (Aluminum)     

           > 15020C Specifications

           20020 Specifications

Heavy Use Tire Services (to 5.3 CFM) – Get 20020 or 20020AD

           20020 Specifications       

           > 20020AD - Automatic Drain Demo

General Vehicle Painting (LVLP) – Get 20020 or 20020AD

           20020 Specifications       

           > 20020AD - Automatic Drain Demo

Motorcycle/Small Car Lift (to 5.3 CFM) – Get 20020 or 20020AD

           20020 Specifications       

           > 20020AD - Automatic Drain Demo

General Shop Use (to 10.6 CFM) – Get 20040C or 20040CAD

           20040CAD Specifications (with Auto Drain)

Blasting Cabinets (10 to 15 CFM) – Get 60040CAD or 20060CAD

           > 60040CAD Specifications (up to 10.6 CFM) 

           > 20060CAD Specifications (up to 14.6 CFM)

Die Grinding/Sanding (10-15 CFM) – Get 60040CAD or 20060CAD

           60040CAD Specifications (up to 10.6 CFM) 

           > 20060CAD Specifications (up to 14.6 CFM)

Chassis Blasting (~15 CFM) - Get the 20060CAD

           > 20060CAD Specifications (up to 14.6 CFM)

General Heavy Use/Car Lift (~15 CFM) – Get the 20060CAD

           > 20060CAD Specifications (up to 14.6 CFM)

 

Automotive Specialty:

Tire Inflation (up to 175 PSI) – Get 20015HP or 20015HPAD

           > 20015HP Specifications    

           > 20015HPAD - Automatic Drain Demo

Mobile Detailing – Get 1P1060S, 4610S or 15020C

           > 1P1060S Specifications

           > 4610S Specifications 

           > 4710SQ Specifications  

           > 15020C Specifications

Automotive Cleaning – Get 1P1060SP or 15020C

           > 1P1060SP Specifications

           > 15020C Specifications

Engraving:

Light Use Engraving (to 2.2 CFM) – Get 4610, 6010 or 8010

           > 4610S Specifications

           > 4610AC Specifications (Aluminum)   

           8010 Specifications

           > 8010A Specifications (Aluminum)

           > 8010AD Specifications (with Auto Drain)

Heavy Use Engraving (to 5.3 CFM) – Get 10020C or 20020

          > 4620AC Specifications (Aluminum)   

          10020C Specifications

          > 10020CAD Specifications (with Auto Drain)

          > 10020AC Specifications (Aluminum)    

          20020 Specifications

          > 20020AD - Automatic Drain Demo

  

Dentist Practice / Dental Milling:

Dental Office (2-4 Chairs; 80% Dry Air) – Get the 10020DCAD or 20040DCAD

          > 10020DC Specifications (up to 5.3 CFM)

          > 10020DCAD Specifications (up to 5.3 CFM, with Auto Drain)

          > 10020DSPCAD Specifications (up to 5.3 CFM in Sound Proof Cabinet)

          > 20040DCAD Specifications (up to 10.6 CFM)

          > 20040DSPCAD Specifications (up to 10.6 CFM, Sound Proof Cabinet)

          > 60040DCAD Specifications (up to 10.6 CFM)

Dental Office (4 Chairs; 80% Dry Air) – Get the 20040DCAD or 60040DCAD

          > 20040DCAD Specifications (up to 10.6 CFM)

          > 20040DSPCAD Specifications (up to 10.6 CFM, Sound Proof Cabinet)

          > 60040DCAD Specifications (up to 10.6 CFM)

Dental Office (4 Chairs; 98% Dry Air: ISO 8573) - Get the 20040DCADC, 20040DSPCADC or 60040DCADC

          > 20040DCADC Specifications (up to 10.6 CFM) 

          > 20040DSPCADC Specifications (in Sound Proof Cabinet)

          > 60040DCADC Specifications (up to 10.6 CFM)

Dental Office (1 User/Chair; 80% Dry Air) – Get the 10010DC or 10020DC

          > 8010DSPC Specifications (up to 3 CFM, 80% Dry Air)         

          > 10010DC / 10010DCAD Specifications (up to 2.2 CFM)

          > 10010LFDC Specifications (up to 3.0 CFM)

Dental Office (1 User/Chair; 98% Dry Air) – Get the 10020HDCADC 

          > 10020HDCADC Specifications (up to 5.3 CFM, 110 Volts)

          > 10020HDCADC-22060 Specifications (to 5.3 CFM, 220 Volts only)

          > 20040DCADC Specifications (up to 10.6 CFM)  

 

Light Duty Dental Milling Machine (80% Dry Air: MAXIMUM 2.5 CFM CONTINUOUS!)* – Get the 10020DCAD

          > 10020DC Specifications (up to 5.3 CFM)

          > 10020DCAD Specifications (up to 5.3 CFM, with Auto Drain)

          10020DSPCAD Specifications (up to 5.3 CFM in Sound Proof Cabinet)

 

Large Dental Milling Machine (80% Dry Air: MAXIMUM 5.2 CFM CONTINUOUS!)* – Get the 20040DCAD or 60040DCAD

          > 20040DC / 20040DCAD Specifications (up to 10.6 CFM)

          > 20040DSPCAD Specifications (up to 10.6 CFM, Sound Proof Cabinet)

          > 60040DCAD Specifications (up to 10.6 CFM)

*To efficiently operate (1) each Milling Machine continuously a 4.0 HP model is required.

 

General Dental Tools (80% Dry Air) – Get the 10020DCAD or 20040DCAD

          > 10020DC Specifications (up to 5.3 CFM)

          > 10020DCAD Specifications (up to 5.3 CFM, with Auto Drain)

          10020DSPCAD Specifications (up to 5.3 CFM, Sound Proof Cabinet)

          > 20040DC / 20040DCAD Specifications (up to 10.6 CFM)

          > 20040DSPCAD Specifications (up to 10.6 CFM, Sound Proof Cabinet)

 

Woodworking:

Small Tools Use – Get the 2010A or 2010SP

           2010A Specifications (Aluminum)

           > 2010SP Specifications (with Pre-Set PSI levels)

Desktop CNC Use (to 2.2 CFM) - Get the 8010, 8010A or 8010AD

           8010 Specifications

           > 8010A Specifications (Aluminum)

           > 8010AD Specifications

General Use/Laser Cutting (to 5.3 CFM) – Get 10020C or 10020AC

           10020C Specifications

           > 10020AC Specifications (Aluminum)

           > 10020CHAD Specifications  

Medium Pneumatics/CNC Use (to 5.3 CFM) – Get the 15020C or 20020

           > 15020C Specifications

           20020 Specifications

Large Bandsaw Use (to 10.6 CFM) – Get the 20040C, 20040CAD or 20040DCAD

          20040C / 20040CAD Specifications

          > 20040DC / 20040DCAD Specifications (Dry Air, up to 10.6 CFM)

Sound Proof Cabinets – Get the 8010SPC, 10020SPC or 20040SPC

          > 8010SPC Specifications (up to 3 CFM)

          > 8010DSPC Specifications (up to 3 CFM, 80% Dry Air)

          > 10020SPC Specifications (up to 5.3 CFM)  

          10020DSPCAD Specifications (up to 5.3 CFM, 80% Dry Air, Sound Proof Cabinet)

          > 20040SPCAD Specifications (up to 10.6 CFM) 

          > 20040DSPCAD Specifications (up to 10.6 CFM, 80% Dry Air, Sound Proof Cabinet)

          > 20040DSPCADC Specifications (up to 10.6 CFM, 98% Dry Air, in Sound Proof Cabinet)

 

Laser / Plasma Cutting:

Small Table Top (Non-Dry; to 2.2 CFM) – Get the 8010, 8010A or 8010AD

            8010 Specifications

            > 8010A Specifications (Aluminum)

            > 8010AD Specifications

General Laser Cutting (Non-Dry; to 5.3 CFM) – Get the 10020C or 10020AC

            10020C Specifications

            > 10020AC Specifications (Aluminum)

            > 10020CHAD Specifications  

Fiber Laser (80% Dry Air) – Get the 10010DC or 10010DCAD

           > 10010DC / 10010DCAD Specifications (up to 2.2 CFM)

           > 10010LFDC Specifications (up to 3.0 CFM)

General Light Duty Use (80% Dry Air) – Get the 10010DC

           > 10010DC / 10010DCAD Specifications (up to 2.2 CFM)

           > 10010LFDC Specifications (up to 3.0 CFM)

Medium to Heavy Use (80% Dry Air) – Get the 10020DC or 10020DCAD

           > 10020DC Specifications (up to 5.3 CFM)

           > 10020DCAD Automatic Drain Demo

Plasma (80% or 98% Dry Air; to 10.6 CFM) – Get the 20040DCAD or 20040DCADC

           > 20040DC / 20040DCAD Specifications (Dry Air, up to 10.6 CFM)

           > 20040DSPCAD Specifications (up to 10.6 CFM, 80% Dry Air, Sound Proof Cabinet)

           > 20040DCADC Specifications (up to 10.6 CFM, 98% Dry Air)  

           > 60040DCADC Specifications (up to 10.6 CFM, 98% Dry Air)

 

CNC:

Tabletop Use – Get the 8010, 10020C or 10020AC

           8010 Specifications

           > 8010A Specifications (Aluminum)

           > 8010AD Specifications

           10020C Specifications

           > 10020AC Specifications (Aluminum)

           > 10020CHAD Specifications  

Medium Equipment Use – Get the 20040C, 20040CAD or 20040DCAD

          20040C / 20040CAD Specifications

          > 20040DC / 20040DCAD Specifications (Dry Air, up to 10.6 CFM)

Large Equipment Use (to 10.6 CFM) – Get the 60040CAD

          60040CAD Specifications (up to 10.6 CFM) 

Multi-Product Shop Use – Get the 60040CAD or 20060CAD

          60040CAD Specifications (up to 10.6 CFM) 

          > 20060CAD Specifications (up to 14.6 CFM)

 

Hobby / Artist:

Air Brushing – Get the 1P1060S or 8010

           > 1P1060S Specifications

           > 1P1060SP Specifications

           8010 Specifications

Specialty Hobby – Get the 4610S or 4710SQ

           > 4610S Specifications

           > 4710SQ Specifications

Light LVLP Painting – Get the 8010 or 8010A

           8010 Specifications

           > 8010A Specifications (Aluminum)

On-Site Painting (LVLP) – Get the 10020C or 20020

           10020C Specifications

           > 10020AC Specifications (Aluminum)    

           20020 Specifications

Painting Professional – Get the SP-33500K Gun Kit

Resin Casting (2.5 Gallon) – Get the 255C with 1P1060S 

           > 255C Specifications (2.5 Gal)

           > 1P1060S Specifications

           > 1P1060SP Specifications

Resin Casting (5 Gallon) – Get the 365C with 4710SQ

           > 365C Specifications (5 Gal)          

           > 4710SQ Specifications

Resin Casting (5 Gallon) – Get the 365C with 8010

           > 365C Specifications (5 Gal)  

           8010 Specifications

           > 8010A Specifications (Aluminum)

"Wide-Mouth" Resin Casting Pot (10 Gal) - Get 1810C with 8010

           > 1810C Specifications

           8010 Specifications

           > 8010A Specifications (Aluminum)

255C/365C/1810C Resin Casting Pot Overview

           > 1810C Specifications (10 Gal)

           > 365C Specifications (5 Gal)

           > 255C Specifications (2.5 Gal)

           > 1P255CH Specifications (255C/Compressor Bundle)

                   

Assembly / Manufacturing:

Capping Machine – Get the 10020C, 10020CHAD or 20020

           10020C Specifications

           > 10020AC Specifications (Aluminum)    

           > 10020CHAD Specifications  

           20020 Specifications

Light Duty Pneumatics – Get the 20040C or 20040CAD

           20040C / 20040CAD Specifications

Medium Duty Pneumatics – Get the 60040CAD or 60040DCAD

           60040CAD Specifications (up to 10.6 CFM) 

           > 60040DCAD Specifications (up to 10.6 CFM, 80% Dry Air)

Heavy Duty Pneumatics (up to 20 CFM) – Get the 20060CAD

           > 20060CAD Specifications (up to 14.6 CFM)

           > 20060CAD Operations Demo

Small to Medium Bottling Systems – Get the 60040DCAD

           60040CAD Specifications (up to 10.6 CFM) 

           > 60040DCAD Specifications (up to 10.6 CFM, 80% Dry Air)

98% Dry Air (ISO 8573) Pneumatics – Get the 20040DCADC

          > 10020HDCADC Specifications (up to 5.3 CFM, 110 Volts)

          > 10020HDCADC-22060 Specifications (to 5.3 CFM, 220 Volts only)

          > 20040DCADC Specifications (up to 10.6 CFM)  

          > 20040DSPCADC Specifications (up to 10.6 CFM in Sound Proof Cabinet)

          > 60040DCADC Specifications (up to 10.6 CFM)

Die Grinding/Sanding (10 to 15 CFM) – Get the 60040CAD or 20060CAD

           60040CAD Specifications (up to 10.6 CFM) 

           > 20060CAD Specifications (up to 14.6 CFM)

 

Restaurant / Bakery / Grocery:

Light Duty/Cake Decorating – Get 4610AC or 8010

          > 4610AC Specifications (Aluminum)   

          > 4610ALFCAD Specifications (Long Life Motor & Auto Drain)            

          > 8010 Specifications

          > 8010A Specifications (Aluminum)

Sound Proof Cabinets – Get 8010SPC, 10020SPC or 20040SPC

          > 8010SPC Specifications (up to 3 CFM)

          > 8010DSPC Specifications (up to 3 CFM, 80% Dry Air)

          > 10020SPC Specifications (up to 5.3 CFM)  

          10020DSPCAD Specifications (up to 5.3 CFM, 80% Dry Air)

          > 20040SPCAD Specifications (up to 10.6 CFM) 

          > 20040DSPCAD Specifications (up to 10.6 CFM, 80% Dry Air)

          > 20040DSPCADC Specifications (up to 10.6 CFM, 98% Dry Air)

Pizza Dough/Bread Press – Get the 10020AC

           10020C Specifications

           > 10020AC Specifications (Aluminum)  

           > 10020CHAD Specifications  

General Kitchen (80%/98% Dry Air) – Get the 20040DCAD or 20040DCADC

          > 10020HDCADC Specifications (up to 5.3 CFM, 110 Volts)

          > 10020HDCADC-22060 Specifications (to 5.3 CFM, 220 Volts only)

          > 20040DC / 20040DCAD Specifications (up to 10.6 CFM)

          > 20040DSPCAD Specifications (up to 10.6 CFM, 80% Dry Air, Sound Proof Cabinet)

          > 20040DCADC Specifications (up to 10.6 CFM, 98% Dry Air)  

Beverage & Food (98% Dry Air) – Get the 10020HDCADC, 20040DCADC or 60040DCADC

          > 10020HDCADC Specifications (up to 5.3 CFM, 110 Volts)

          > 10020HDCADC-22060 Specifications (to 5.3 CFM, 220 Volts only)

          > 20040DCADC Specifications (up to 10.6 CFM, 98% Dry Air)  

          > 60040DCADC Specifications (up to 10.6 CFM, 98% Dry Air)

Heavy Duty Pneumatics (15-20 CFM) – Get the 20060CAD

          > 20060CAD Specifications (up to 14.6 CFM)

 

Engineering / University / Government:

Tech Labs (98% Dry Air, 5.3 CFM, 110 V) – Get the 10020HDCADC 

          > 10020HDCADC Specifications (up to 5.3 CFM, 110 Volts)

          > 10020HDCADC-22060 Specifications (to 5.3 CFM, 220 Volts only)

Tech Labs (98% Dry Air, 10.6 CFM, 220 V) - Get the 20040DCADC or 20040DSPCADC     

          > 20040DCADC Specifications (up to 10.6 CFM, 98% Dry Air) 

          > 20040DSPCADC Specifications (up to 10.6 CFM, 98% Dry Air, in Sound Proof Cabinet)

          > 60040DCADC Specifications (up to 10.6 CFM, 98% Dry Air)

University Laboratories (80 & 98% Dry Air) – Get the 20040DCADC

          > 10020HDCADC Specifications (up to 5.3 CFM, 110 Volts)

          > 10020HDCADC-22060 Specifications (to 5.3 CFM, 220 Volts only)

          20040C / 20040CAD Specifications 

          > 20040DC / 20040DCAD Specifications (80% Dry Air, up to 10.6 CFM)

          > 20040DSPCAD Specifications (up to 10.6 CFM, 80% Dry Air, Sound Proof Cabinet)

          60040CAD Specifications (up to 10.6 CFM) 

          > 60040DCAD Specifications (up to 10.6 CFM, 80% Dry Air)     

          > 20040DCADC Specifications (up to 10.6 CFM, 98% Dry Air) 

          > 60040DCADC Specifications (up to 10.6 CFM, 98% Dry Air)

Surgical & Biotech (98% Dry Air; ISO 8573) – Get the 20040DCADC

          > 10020HDCADC Specifications (up to 5.3 CFM, 110 Volts)

          > 10020HDCADC-22060 Specifications (to 5.3 CFM, 220 Volts only)

          > 20040DCADC Specifications (up to 10.6 CFM, 98% Dry Air) 

          > 20040DSPCADC Specifications (up to 10.6 CFM, 98% Dry Air, in Sound Proof Cabinet)

          > 60040DCADC Specifications (up to 10.6 CFM, 98% Dry Air)

15-20 CFM System Pneumatics (Non-Dry) – Get the 20060CAD

          > 20060CAD Specifications (up to 14.6 CFM)

 

Retail / Theme Parks:

Animatronics – Get the 4610S, 4610AC, 4620AC or 10020CHAD

           > 4610S Specifications

           > 4610AC Specifications

           > 4610ALFC Specifications

           > 4610ALFCAD Specifications

           > 4620AC Specifications

           > 10020CHAD Specifications  

Sound Proof Cabinets – Get the 8010SPC, 10020SPC or 20040SPC

           > 8010SPC Specifications (up to 3 CFM)

           > 8010DSPC Specifications (up to 3 CFM, 80% Dry Air)

           > 10020SPC Specifications (up to 5.3 CFM)   

           10020DSPCAD Specifications (up to 5.3 CFM, 80% Dry Air)

           > 20040SPCAD Specifications (up to 10.6 CFM) 

           > 20040DSPCAD Specifications (up to 10.6 CFM, 80% Dry Air)

 

Beverage Industry:

Beverage Machines – Get the 2010ALFC or 4610ALFC

          2010ALFC Specifications (with Long Life Motor)

          > 2010ALFCAD Specifcations (with Long Life Motor & Auto Drain)

          > 4610ALFC Specifications (with Long Life Motor)

          > 4610ALFCAD Specifications (with Long Life Motor & Auto Drain)

          > 6010LFC Specifications (with Long Life Motor)

 

Marine / Boating:

Yacht & Boat Horns – Get the 4620AC

          > 4620AC Specifications

Yacht Pneumatic Systems – Get the 4610AC or 4620AC

          > 4610AC Specifications

          > 4620AC Specifications

 

NEW - 6.0 Hp,20 Gallon Ultra Quiet & Oil-Free 15 CFM Air Compressor

Click Here for 20060CAD Info!

NEW! 1810C - 10 Gallon Casting Pressure Pot

Click Here for 1810C Info

<<< SPECIAL OFFER >>>

SPRAYIT PRO 21 Electric Professional Airless Paint Sprayer

Clicke HERE for more Info
Print | Sitemap
© california air tools inc

This website was created using IONOS MyWebsite.