Belt-Driven Pump (2 Cylinder, Oil Lubricated)
The CALAIR 60037BD Continuous Run 3.7 Hp Air Compressor is designed for CONTINUOUS RUNNING up to 8 hours at 90 PSI.
The CALAIR 60037BD Air Compressor has a Pump System that is designed to have a life cycle before maintenance/service of 5,000 to 10,000 hours of usage.
The large 60 gallon ASME Certified steel air tank is just the right size for a shop, warehouse or factory.
Ideal for Air Brushing, Bolting, Brad Nailing, Cutting, Drilling, Grinding, Finish Nailing, Framing Nailing, HVLP Painting, Hobby Nailing, Hobby Painting, Inflation, Roof Nailing, Spraying, Stapling, Trim & Impacting/Wrenching.
Designed for people looking for reliable air flow in commerical and semi-rugged environments.
Features:
* 3.7 Hp Motor w/Reset Switch
* Belt-Driven Pump (Oil Type ISO 68 / LDAB68). 5000 to 10000 hour life.
Single Stage Pump (2 cylinders)
* Pressure Gauge
* 1/2" NPT Output Valve Port
NOTE: 1/2" Output Ball Valve & 125 PSI Pressure Regulator NOT included
Air Ouput Ball Valve, 1/2" NPT, available separately (click here)
5-125 PSI Pressure Regulator available separately (click here)
* Power On/Pressure Switch
* Motor Thermal Overload Protector (Trips @135C)
* Working Pressure - 125 - 155 PSI
* 208 Volt (200v-216v) to 230 Volt (220v-240v) / 60 Hertz / Single Phase
* 11.5 CFM @90 PSI, 13.6 CFM @40 PSI
* Continuous Run up to 8 hours (10 hours maximum)
* 16.7 Amp Draw
* Power Requirements: Dedicated 20 amp outlet
* Plug Type: NEMA 6-15P Receptacle: NEMA 6-15R or 6-20R
* Maximum Operating (ambient) Temperatures: 36 to 108°F
* Time to fill tank from empty to full (155 PSI) - 6 min 52 seconds
* Recovery time from 125 PSI to 155 PSI - 1 min 37 seconds
* 60 Gallon ASME Certified Steel Air Tank
* Maximum Tank Pressure 180 PSI
* Manual Ball Drain Valve
* 200 PSI Safety Relief Valve
* L (26") x W/D (20.5") x H (73.5")
* 265 lbs (315 lbs on shipping pallet)
* 90 Decibel Noise Level
* Commercial Use: Refer to State & City Codes
* 2 Year Limited Warranty on Pump; 1 Year Limited Warranty on all other components
* Assembled in Mexico with global components
*CALAIR is a Sub-Brand of California Air Tools