Replacing a Motor/Pump

NOTE: A motor-pump is NOT an air compressor. A replacement motor-pump can be easily installed (spliced) into existing California Air Tools equipment - refer to video above. 

 

CAUTION: If installing onto a Non-California Air Tools air compressor or unique application you will need to have the electrical and mechanical knowledge for properly installing a California Air Tools motor-pump. It is important to properly configure an UNLOADER valve and CHECK VALVE with the motor pump (to correctly bleed pressure off of the pistons) otherwise damage to motor may occur.

i.e. Reference 60040DCAD Pressure Switch Wiring

California Air Tools Store - Brand New & Blemished Items
SMART Air Compressors
80 Gal 5.0 Hp 15 CFM
80 Gal 6.0 Hp 20 CFM
60 Gal 3.7 Hp 11.5 CFM
Ideal Job-Site Air Compressor
17-20 cfm 280V 3-Phase
Complete Out-of-Box Solution
CAT-10TL Tankless 1 Hp
ISO 8573 2.3.1 - 98% Dry Air
CAT-33000 Spray Gun, 1.3 mm
8 Gal Aluminum, 1 Hp, 3 CFM, Long-Life Motor, 60 dB
Print | Sitemap
© california air tools inc

This website was created using IONOS MyWebsite.