California Air Tools 365VK  5-Gallon Pressure Pot Vacuum Kit is ideal 

for the resin casting and epoxy professional.  

Compatible with the 365 series (365C, 365CW, 365CR, 365CH) 5-Gallon Pressure Pot; specifically designed for use with vacuum motor-pump systems. 

Kit Includes the following three (3) items* 

• Clear Acrylic Lid
• 5-Gallon Pressure Pot Sealing Ring
• Pressure Gauge with two (2) Female ports (1/4" NPT) and two (2) On/Off ball valves

Weight: 8 lbs

Dimensions: 14 ½” x 14 ½” x 3 ¼” 

Commercial Use: Refer to State & City Codes

*5-Gallon Pressure Pot sold separately.

INSTALLATION TIP: Ensure acrylic lid and seal (gasket) are properly installed and tightened down to ensure a tight seal is made to support vacuum. 

CAUTION: Do not use with SINGLE COMPOUND chemicals/epoxies as cracking of the acylic lid may occur, leading to air leaks. 

Exposure to certain chemical solvents that can affect the polymers/polycarbonate and their strength which ultimately present themselves as shallow surface cracks, but typically only appear if excessive vacuum pressures are applied.

Need a 5 Gallon Pressure Pot?

...then get the 365C or 365CH