Installing Automatic Drain Valve

Installing the Automatic Drain Valve on a 10020CAD

 

1. Unpackage the Air Compressor

2. Remove the Auto Drain Valve that is  attached to the compressor frame.

3. Lay air compressor on it's side. (carefully)

4. Attach the Auto Drain Valve to the female quick connector located at

    the bottom of the air compressor air tank.

    The fitting are Push-In to connect air fittings.

5. Stand up the air compressor and read the Owner's Manual to get started.

 

 

CLICK HERE!! For SAVINGS!!

<<< NEW ARRIVALS >>>

NEW! 12 Volt  1.0 Gal. Lightweight (30 Pound) Air Compressor

Click on Picture for Info

NEW! 2.0 Hp 10 Gal. Lightweight - Rust-Free Aluminum Air Tank

Click on Picture for info

NEW - 2.0 Hp 20 Gallon

Click on the Picture for info!
Print Print | Sitemap
© california air tools inc

This website was created using 1&1 IONOS MyWebsite.